Miele Washer Dryers
Select a topic below:
- ’<25% load’ — Error shows with drum empty
- ’<25%’ or ‘no load value’ — Drum sensor has incorrectly calibrated load weight
- Check detergent — There is too much detergent in the appliance
- Display is in a foreign language — Incorrect language set
- Drain fault / ‘Drain’ check light flashing — Water isnʼt draining
- Drum lighting fault — Plastic bulb cover not correctly fitted
- F1 — Short circuit in the water temperature sensor
- F104 — Mains voltage is too low / drum drive motor is faulty
- F11 — Water isnʼt draining
- F138 — Water in drip tray
- F19 — Flow meter stiff
- F2 — Temperature sensor open-circuited
- F20 — Heating fault
- F3 — Heater bank temperature sensor circuit short-circuited.
- F39, F43, F45, F47, F93 — Electronic module fault
- F4 — Heater bank temperature sensor open-circuited
- F50 — Drive fault
- F51 — Pressure sensor faulty
- F53 — Starting fault
- F55 — Laundry still damp after maximum drying time
- F62 — Issue with programme selector
- F63 — Water path control unit fault
- F64 — Magnetic field sensor open-circuited
- F65 — Drum lighting fault
- Inlet fault / ‘Inlet drain’ check light flashing
- Locked, Enter code — System lock is activated
- Stripes visible in the display — Display is distorted
- Techn. fault, call service — Undefined fault
- Water inlet — Water supply to the appliance is compromised
- Waterproof system activated — Mieleʼs waterproof system has been activated
- Zero point setting not possible — Door is closed