• Please make sure you follow these instructions fully. If you have any problems with carrying out this maintenance, please contact us.

    The washer dryer must be installed in an area so that when it is in use there is adequate ventilation. You must avoid the back flow of gases into the room where the washer dryer is from appliances burning other fuels, including open fires. Always check the instructions in the user manual for details of this for your specific washer dryer, but the steps below will give you some general guidance.
  • 1. If you are going to install the washer dryer under a worktop, or in a ‘built-in’ location, make sure you leave sufficient space between the top and sides of the appliance and any surface above or beside it to allow proper air circulation all around the washer dryer. Please make sure that you follow any user manual instructions, guidelines or recommendations for positioning your washer dryer. The washer dryer must never be installed behind a lockable or sliding door (or a door with a hinge on the opposite side to that of the washer dryer door hinge).
  • If you have misplaced or lost your user manual, you can download a replacement manual (please have your model number to hand).